Struct devices::sys::linux::serial_device::ConsoleInput

source · 
pub struct ConsoleInput(Stdin);

Tuple Fields§

§0: Stdin

Implementations§

source§

impl ConsoleInput

source

pub fn new() -> Self

Trait Implementations§

source§

impl Read for ConsoleInput

source§

fn read(&mut self, out: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
1.36.0 · source§

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers. Read more
source§

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)
Determines if this Reader has an efficient read_vectored implementation. Read more
1.0.0 · source§

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Read all bytes until EOF in this source, placing them into buf. Read more
1.0.0 · source§

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Read all bytes until EOF in this source, appending them to buf. Read more
1.6.0 · source§

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Read the exact number of bytes required to fill buf. Read more
source§

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Pull some bytes from this source into the specified buffer. Read more
source§

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)
Read the exact number of bytes required to fill cursor. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adaptor for this instance of Read. Read more
1.0.0 · source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Transforms this Read instance to an Iterator over its bytes. Read more
1.0.0 · source§

fn chain<R>(self, next: R) -> Chain<Self, R>
where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another. Read more
1.0.0 · source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
source§

impl ReadNotifier for ConsoleInput

source§

fn get_read_notifier(&self) -> &dyn AsRawDescriptor

Gets a descriptor that can be used in EventContext to wait for events to be available (e.g. to avoid receive_events blocking).
source§

impl SerialInput for ConsoleInput

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<R> ReadBytesExt for R
where R: Read + ?Sized,

§

fn read_u8(&mut self) -> Result<u8, Error>

Reads an unsigned 8 bit integer from the underlying reader. Read more
§

fn read_i8(&mut self) -> Result<i8, Error>

Reads a signed 8 bit integer from the underlying reader. Read more
§

fn read_u16<T>(&mut self) -> Result<u16, Error>
where T: ByteOrder,

Reads an unsigned 16 bit integer from the underlying reader. Read more
§

fn read_i16<T>(&mut self) -> Result<i16, Error>
where T: ByteOrder,

Reads a signed 16 bit integer from the underlying reader. Read more
§

fn read_u24<T>(&mut self) -> Result<u32, Error>
where T: ByteOrder,

Reads an unsigned 24 bit integer from the underlying reader. Read more
§

fn read_i24<T>(&mut self) -> Result<i32, Error>
where T: ByteOrder,

Reads a signed 24 bit integer from the underlying reader. Read more
§

fn read_u32<T>(&mut self) -> Result<u32, Error>
where T: ByteOrder,

Reads an unsigned 32 bit integer from the underlying reader. Read more
§

fn read_i32<T>(&mut self) -> Result<i32, Error>
where T: ByteOrder,

Reads a signed 32 bit integer from the underlying reader. Read more
§

fn read_u48<T>(&mut self) -> Result<u64, Error>
where T: ByteOrder,

Reads an unsigned 48 bit integer from the underlying reader. Read more
§

fn read_i48<T>(&mut self) -> Result<i64, Error>
where T: ByteOrder,

Reads a signed 48 bit integer from the underlying reader. Read more
§

fn read_u64<T>(&mut self) -> Result<u64, Error>
where T: ByteOrder,

Reads an unsigned 64 bit integer from the underlying reader. Read more
§

fn read_i64<T>(&mut self) -> Result<i64, Error>
where T: ByteOrder,

Reads a signed 64 bit integer from the underlying reader. Read more
§

fn read_u128<T>(&mut self) -> Result<u128, Error>
where T: ByteOrder,

Reads an unsigned 128 bit integer from the underlying reader. Read more
§

fn read_i128<T>(&mut self) -> Result<i128, Error>
where T: ByteOrder,

Reads a signed 128 bit integer from the underlying reader. Read more
§

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error>
where T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader. Read more
§

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error>
where T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader. Read more
§

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error>
where T: ByteOrder,

Reads an unsigned n-bytes integer from the underlying reader.
§

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error>
where T: ByteOrder,

Reads a signed n-bytes integer from the underlying reader.
§

fn read_f32<T>(&mut self) -> Result<f32, Error>
where T: ByteOrder,

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more
§

fn read_f64<T>(&mut self) -> Result<f64, Error>
where T: ByteOrder,

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more
§

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more
§

fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more
§

fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more
§

fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more
§

fn read_i8_into(&mut self, dst: &mut [i8]) -> Result<(), Error>

Reads a sequence of signed 8 bit integers from the underlying reader. Read more
§

fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of signed 16 bit integers from the underlying reader. Read more
§

fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of signed 32 bit integers from the underlying reader. Read more
§

fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of signed 64 bit integers from the underlying reader. Read more
§

fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of signed 128 bit integers from the underlying reader. Read more
§

fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more
§

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error>
where T: ByteOrder,

👎Deprecated since 1.2.0: please use read_f32_into instead
DEPRECATED. Read more
§

fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error>
where T: ByteOrder,

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more
§

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error>
where T: ByteOrder,

👎Deprecated since 1.2.0: please use read_f64_into instead
DEPRECATED. Read more
§

impl<R> ReadFromDescriptorChain for R
where R: Read,

§

fn read_obj<T>(&mut self) -> Result<T, Error>
where T: VmediaType,

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V